Code Grabber Pandora D605 – Instruction / User Manual

As was written in previous articles – how Code Grabber Pandora D605 works in 8 modes (from 1 till 8).
Here is a description how to work in 8 modes.

Button 1 – switches memory cells forward.
Button 3 – switches memory cells backward.
Hold button 2 to erase the code from the selected cell. If the cell is empty, reception is automatically turned on. When an alarm is received, the device vibrates twice and displays the type of alarm received on the display. If the received signal is already in memory, the device vibrates briefly and shows the number of the location in which this signal is recorded in the right edge of the display.
If the cell is empty, you can switch the reception frequency with button 4.

Button 5 – enables or disables simultaneous AM and FM reception (only in the first mode), enables or disables automatic mode (hold down button 3).

How to manage signals which are in the cells?

If a signal is fixed in the cell, the signal can be opened and managed by buttons 4, 5, 6.
Short click button 4 – close car;
Long click button 4 – accepted command;
Short click button 5 – open car;
Long click button 5 – highway/additional functions (not on all systems);
Short click button 6 – autorun/trunk (not on all systems);
Long click button 6 – exit, back to the menu.

Short click button 2 – quick switching between modes 1, 2 and 3 (AM + FM + Staff, FM regular and VAG)
Simultaneously hold button 4 and 5 to enable or disable muting of a responsive signal (while display lights up JAMM indicator).
Catch the code – simultaneously press button 4 + 6. The display will catch up with the “Catcher Code”. After this the next sent command will be increased by 50 meeting clicks. It is useful when opening occurs in a long time after recording.

When code grabber is in a sleep mode, it shows the clock and date. You can record alarm of your car in cell 0. You can use it without arousing suspicion.
Code Grabber uses 4-digit pin code with display input (i.e. you see what you are entering)

https://www.youtube.com/watch?v=OZvDQFmSGeo

Code Grabber Instruction for road barriers Came and Nice.

Came and Nice barrier enumeration mode.
In order to select a code for a Came or Nice barrier (not all models, only those controlled by Came Top, Nice Flo), you must select the appropriate mode. After entering the start search mode for Came – button 4, for Nice – button 5. The selected cell must be empty.
After you have started the search, you need to stand at the barrier and wait until it opens. As soon as it opens, you must immediately press and hold button 2, the search will stop. Next, you need to wait until the barrier itself closes, then press and hold button 1 (rewind), hold until the barrier opens again, and then immediately release the button. Then you can check the selected code by pressing and holding button 5, the barrier should open. Saving the selected code – pressing button 4.
For Nice barriers, the search looks exactly the same, only it lasts longer (I came – about 10 minutes, Nice – about 20 minutes). Launched by pressing button 5 immediately after entering the enumeration mode, on an empty memory cell.

Contact me in Telegram if you have any questions related to Code Grabber Instruction: https://t.me/UnlockCars

Code Grabber Channel: https://t.me/UnlockCars_Grabber

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!