Code Grabber P24 Pandora D605, Keyless Go Repeaters, Car Jammers

How to use AST Unlocker PRO + Emergency Start for Toyota/Lexus

How to use AST Unlocker Pro, JBL Emergency Start

Does you car have key authorization unit malfunction? Or have you lost all keys from your car?
Use AST Unlocker Pro to Emergency engine start on Toyota and Lexus vehicles.

The JBL device works with all known models of Toyota and Lexus. Cars must be equipped with a smart key system, which is manufactured between 2017 and 2022. To unlock and start the engine, you
just need to put the needles on the designated purpose. You need to make the connection via the communication socket on the front left headlight for all Toyota and Lexus models.

How to use Auto Start Toyota Unlocker Pro JBL
How to use AST Unlocker PRO

Front LEFT light conector for ALL models Toyota/Lexus equipped with intelligent light system! Use pin 23 and 24.

How to use AST Unlocker PRO, if the car is unlocked and you just need to start it

If the car is unlocked and you just need to start it, the most convenient connection position is the smart key module. Using the specified socket on the module, simply insert the needles into the correct slots.

Keys A9/AA/HiTag

Cars with keys AA/A9/HiTagToyota: Rav4 2019 +/CH-R 2016+/Corolla 2019+/Prius 2018+/Camry 2018+…
Lexus – UX 2019+/RX 2016+/LS 2018+/LC 2018+/GS 2018+/ES 2018+…

Emergency Start for Toyota/Lexus with keys AA/A9/HiTag
Keys A9/AA/HiTag

Keys A8

Cars with key A8 – IS, LX, LS, NX, Alphard, Highlander, LC150, LC200, Prado.

Emergency Start for Toyota/Lexus with key A8: IS, LX, LS, NX, Alphard, Highlander,
LC150, LC200, Prado
Keys A8

Keys 39

Cars with keys (39) – Fortuner, Hilux (from 2015 to 2018+)

Emergency Start of car with key 39 - Fortuner, Hilux (from 2015 to 2018+)
Keys 39

How to use AST Unlocker PRO to unlock the car?

To unlock and start a car with lost or damaged keys you need to turn on AST Unlocker PRO and then it will start flashing red.
Insert the USB cable into the JBL device.

Plug the pins into the indicated sockets. If the LED still flashes red, it means that pins are not placed correctly.
Switch them off and turn them over to change the positions of the needles.

When the needles are inserted correctly, the device will start flashing green.
After 5 seconds the green LED will remain lit – at this time you need to press the play button to unlock the car.

After you have unlocked, sit in the vehicle, apply the brake and at the same time start using the vehicle start button.

You can also apply this procedure in cases when the car is unlocked, but all keys are lost. In such case: turn the pins in the indicated places on the smart module, after the LED remains solid green, turn off the device, wait for the ignition to go out and press the brake and start button. in the movement of the car.


JBL Unlocker (AST Unlock Pro) – 4500 euro

Quickstart (AST Pro Emergency Start) – 4000 Euro

Price of kit (AST Unlock Pro + Emergency Start) – 8000 Euro


Contact me in Telegram for all questions: https://t.me/UnlockCars

Code Grabber Channel: https://t.me/UnlockCars_Grabber

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!


Leave a Reply

Your email address will not be published. Required fields are marked *

error: Contact us via Telegram: @UnlockCars