Code grabbers for barriers

The universal code grabbers for barriers and garage doors copies the signal that goes to the barrier or door lock from the original remote control and automatically saves it.
A code grabber is a device to bypass an automatic alarm.

There are 2 types of Code Grabbers for barriers:
1. Code grabber for barriers, automatic gates & RFID cards ALPHA / Alfa
2. Code Grabber Pandora

1. Code grabber ALPHA for automatic gates, barriers & RFID cards

The Code Grabber Alpha for the barrier and gate is used when working with automatic security systems that operate at 315 and 433.92 mega Hertz. The average range of such devices is 20-25 m in good weather conditions.

Key modes of operation of Code Grabber Alpha:

1. Picking up a password.
2. Copying the cipher.
3. Grabber for the barrier to buy on the official website of the company or on the phone from the manager of the organization.

Trademarks of alarm systems with which the barrier robber works:

Nice
Door Han
F A A C
Roger
Ditec
Maran Tech
All Matic
DEA
C A M E
And more others

We have manufactured the code grabber of the barriers with special algorithms to adapt to the systems of other manufacturers, which makes the device almost universal. Code Grabber Alpha operates from a single battery with a nominal capacity of 1.5B.

The Alpha grabber for barriers has a 17 cm long antenna. In practice, users often reduces the antenna by half (up to 85-90 mm). At the same time, the range of the device will not be significantly reduced. Code grabber for the barrier to buy directly from the manufacturer from the official dealer.

Code Grabber for doors(RFID grabber) and barriers

Equipment that works with static codes. These are the simplest security systems. The benefits of static code, ease of use and cheapness. Weaknesses – it is very easy to open such a security system.
A device that operates on the basis of a spoof code. The principle of this device is based on the interception of the signal sent by the keychain to the receiving alarm unit. The device creates interference, which allows you to replace the signal-request sent to your code.

Buy Code Grabber for Barriers via Telegram chat.

Barrier and gate code scanner

The basis of the barrier scanner device is that it is a master keychain, that is, a training keychain. The device allows you to keep in memory about a hundred remotes of security systems.

The barrier code grabber is made in a plastic case, is equipped with a telescopic antenna up to 20 centimeters, has five buttons and a joystick to navigate the menu of the device. It is compact in size. All the information is displayed on the liquid crystal screen. We’ve built a special RF-ID module into the board. The module is designed to select the safety code of intercom tags and cards and barriers at a working frequency of up to 125 kHz.

Code Grabber Alpha for barriers has menu in Russian and English. It is possible to put on the password when you turn it on (set your own PIN), as well as set manually working frequency.

Code grabber for barriers and gates
The universal gate code grabber is equipped with AM modulation. These are standard working frequencies of equipment. The monochrome LCD display shows four lines. You can name each cell manually for convenience.

Key modes of operation:

Scan and record codes/requests.
Auto password selection. Used in the case of loss of a keychain or remote inclusion.
Radio signal jamming mode.
The spoofing codes. Universal for security systems of automation, working at a frequency different from the standard.
Copy integrate mode at 125 kHz.

Code grabbers for doors, barriers, and gates can be bought on the UnlockCarsGrabber.com.

2. Code Grabber Pandora for road barriers Came and Nice

Code Grabber Pandora is normally used to grab a code from a car alarm. But, you can also use Code Grabber Pandora to grab a code for barriers Came and Nice.

Instructions for Code Grabber Pandora for barriers Came and Nice.

Came and Nice barrier enumeration mode. In order to select a code for a Came or Nice barrier (not all models, only those controlled by Came Top, Nice Flo), you must select the appropriate mode. After entering the start search mode for Came – button 4, for Nice – button 5. The selected cell must be empty.
After you have started the search, you need to stand at the barrier and wait until it opens. As soon as it opens, you must immediately press and hold button 2, the search will stop. Next, you need to wait until the barrier itself closes, then press and hold button 1 (rewind), hold until the barrier opens again, and then immediately release the button. Then you can check the selected code by pressing and holding button 5, the barrier should open. Saving the selected code – pressing button 4.
For Nice barriers, the search looks exactly the same, only it lasts longer (Came – about 10 minutes, Nice – about 20 minutes). Launched by pressing button 5 immediately after entering the enumeration mode, on an empty memory cell.

Contact me in Telegram for all questions: https://t.me/UnlockCars

Code Grabber Channel: https://t.me/UnlockCars_Grabber

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!